Iron Soft Enamel is the most economical method of pin production. It is die struck into an iron base and color filled with most PMS colors. This pin can be protected with an epoxy dome and is much less expensive than copper based pins.
Size |
1000 |
2500 |
5000 |
10,000 |
Die: |
3/4” |
1.02 |
.85 |
.68 |
.64 |
85.00 |
7/8” |
1.04 |
.88 |
.71 |
.66 |
85.00 |
1” |
1.07 |
.89 |
.74 |
.68 |
85.00 |
1-1/8” |
1.11 |
.94 |
.80 |
.72 |
95.00 |
1-1/4” |
1.17 |
.95 |
.87 |
.76 |
95.00 |
1-1/2” |
1.29 |
1.06 |
.98 |
.88 |
105.00 |
4(P) 1(V) |
|||||
No Die charge on quantities of 500 or more.
Prices are based on up to 4 colors
Standard Thickness: 1.2 mm - 1.6 mm depending on pin size
Additional colors add: $.12 (P) per unit
Epoxy dome: $.08(P) per unit
Cut-out Charge: $25.00 (R), $.10 (R) per unit running charge
Standard Metal Plating: Gold, Silver, Bronze, Nickel, Black Nickel
Attachment: Standard military clutch
